Mark One - Stampanti One Plus FrameMark One - Stampante 3d One Plus

SMALL PRODUCTION

One Plus is the printer dedicated to small batches of products.

It is very versatile in terms of materials that can be printed and thanks to the new motherboard it is equipped with all the technical capabilities necessary for industrial use.

ONE PLUS

Mark One - line

One Plus is the printer dedicated to small batches of products. It is very versatile in terms of materials that can be printed and thanks to the new motherboard it is equipped with all the technical capabilities necessary for industrial use.

SMALL PRODUCTION

SMALL PRODUCTION

One Plus is the printer dedicated to small batches of products. It is very versatile in terms of materials that can be printed and thanks to the new motherboard it is equipped with all the technical capabilities necessary for industrial use.

Mark-One-Stampanti-One-Plus-focus

SMALL PRODUCTION

Mark-One-Stampanti-One-Plus-icona

One Plus is a very compact printer. It is ideal for office environments such as those found in research and development departments.

Mark One - line

To be successful in the production of small functional series, it is equipped with a double extruder so that even more complex components can be produced. Thanks to the new motherboard, the technical capabilities of the printer are comparable to those of more advanced printers. It is able to perform more advanced operations. For example, the motherboard allows the printer to detect lost steps and adjust the next steps accordingly; this is a complex task to accomplish, only technologically advanced printers allow it. It saves a lot of time and, above all, significantly reduces material waste. An advantage is perfect for the production of smaller parts and series that do not require large construction volumes.

Size:

75x73x72cm


Printing volume:

200x200x300mm


Weight:

155 kg


Chamber temperature:

MAX 40°


Double extruder:

MAX 300°

Display:

7''

EXPLORE ALL FEATURES

SMALL PRODUCTION

Mark-One-Stampanti-One-Plus-icona

One Plus is a very compact printer. It is ideal for office environments such as those found in research and development departments.

Mark One - line

To be successful in the production of small functional series, it is equipped with a double extruder so that even more complex components can be produced. Thanks to the new motherboard, the technical capabilities of the printer are comparable to those of more advanced printers. It is able to perform more advanced operations. For example, the motherboard allows the printer to
detect lost steps and adjust the next steps accordingly; this is a complex task to accomplish,

Mark One - line

MOST USED FOR

Mark One - APP Automobilismo
Mark One - Automation
Mark One - Mechanical
Mark One - Aerospace
Mark One - Medical
Mark One - line

PRODUCTS PRINTED WITH ONE PLUS

MARK ONE CONTROL BOARD

FEATURES

AUTOMATIC LEVELING OF THE HEATED PLATEN
for precise and reliable prints.
EXTRUDER WEAR
The machines warn the user when it is time to change the nozzle.
COIL WEIGHT
is monitored by the printer to ensure that there is sufficient material to be successfully completed.
AUTOMATIC TEMPERATURE CONTROL
the printer knows the correct temperature parameters for each material and excludes the possibility of errors.
AUTOMATIC FILAMENT CHANGE
the printer can switch independently from one finished filament reel to another full one.
REAL-TIME RENDERING
of the object that is printed and its progress of realization.
EMAIL/SMS NOTIFICATIONS
to one or more operators, regarding notifications of alerts, errors and end-of-press notifications.
PRINT CODE
to improve production time planning.
REAL TIME VIDEO MONITORING
of the object being printed, which can be viewed remotely.
AUTHENTICATION SYSTEM
to enable access only to authorized personnel, either remotely or from the operation panel.
SAVING THE PRINT STATUS
in case of blackout, to resume printing from where it was interrupted.
DETECTION OF THE LOSS OF STEPS
and automatic correction during printing.
Mark One - line

MATERIALS

Mark One - Sfondo materialiMark One - Sfondo materialiMark One - Ready Production icon

MK PRODUCTION

Mark One - Materiali Tecnici icon

MK CARBON

SUPPORTED / SUGGESTED

MK Production
PLA
MK Flexible
MK Carbon
HIPS
PET-G
Polypropylene

MK ABS
ASA
PC
PA
Conductive

SUPPORTED FILAMENT TYPE

MK Solubile A
MK Solubile L

COIL COMPATIBILITY (size)

Up to 1.0 Kg

Mark One - line

MATERIALS

Mark One - Sfondo materialiMark One - Sfondo materialiMark One - Materiali Tecnici icon

MK CARBON

Mark One - Materiali Flessibili Icon

MK FLEXIBLE

SUPPORTED / SUGGESTED

MK Production
PLA
MK Flexible
MK Carbon
HIPS
PET-G
Polypropylene

MK ABS
ASA
PC
PA
Conductive

SUPPORTED FILAMENT TYPE

MK Solubile A
MK Solubile L

COIL COMPATIBILITY (size)

Up to 1.0 Kg

MARK ONE CONTROL BOARD

FEATURES

for precise and reliable prints.

The machines warn the user when it is time to change the nozzle.

is monitored by the printer to ensure that there is sufficient material to be successfully completed.

the printer knows the correct temperature parameters for each material and excludes the possibility of errors.

the printer can switch independently from one finished filament reel to another full one.

of the object that is printed and its progress of realization.

to one or more operators, regarding notifications of alerts, errors and end-of-press notifications.

to improve production time planning.

of the object being printed, which can be viewed remotely.

to enable access only to authorized personnel, either remotely or from the operation panel.

in case of blackout, to resume printing from where it was interrupted.

and automatic correction during printing.

REQUEST A QUOTE

PRINT

TECNOLOGY FDM


NOZZLE
EXTRUDER 1
TYPE Hardened steel, brass
MAXIMUM SPEED  150 mm/s
DIAMETER 0.2 – 0.4 – 0.8 mm


TEMPERATURES
EXTRUDER (MAX) 300°C
ROOM N/A
COIL (PREHEAT) N/A

EQUIPMENT

NEW ELECTRONICS No


AUTOMATIC PLATFORM LEVELING Yes


FLAT SURFACES Glass Ceramic


INTERIOR CHAMBER Powder coated steel


THREAD SENSOR Present


MATERIAL FLOW CONTROL SYSTEM N/A

ACCURACY

PRINT PRECISION ±0.200mm / ±0.002mm/mm

SOFTWARE

OS SUPPORTED Windows OS / Mac OS


SLICING SOFTWARE  Dedicated software included


SUPPORT FORMATS  .stl .gcode


CONNECTION Wi-Fi / USB


Follow us on:

  • facebook icon
  • instagram icon
  • linkedin icon
Privacy Policy Cookie Policy

Copyright © 2020 Mark One s.r.l. - P.I. IT 04249560402 - All rights reserved
error: