fbpx
Mark One - Stampanti One Plus FrameMark One - Stampante new 333
HOME - PRINTERS - MK 333

MK 333

INDUSTRIAL

MK 333 is the most versatile 3D printer produced by Mark One. Created with new technologies, patented by Mark One, in order to make end-products with the highest degree of freedom in terms of materials’ choice.

Mark One - line

INDUSTRIAL

Mark One - line

MK 333 is the most versatile 3D printer produced by Mark One. Created with new technologies, patented by Mark One, in order to make end-products with the highest degree of freedom in terms of materials’ choice.

MK 333 is the most versatile 3D printer produced by Mark One. Created with new technologies, patented by Mark One, in order to make end-products with the highest degree of freedom in terms of materials’ choice.

INDUSTRIAL

Mark-One-Stampanti-One-Plus-focus

INDUSTRIAL PRODUCTION

Mark one stampante MK-333 NEW

The printer is equipped with a double extruder. One is dedicated to the printing of the primary material, while the other is for the support materials.

Mark One - line

The new control board enables a range of features that are unique to the Mark One industrial line and set a new standard for 3D printers. The entire printing process has been designed with the objective of achieving high performance final components. Before the printing process begins, the chamber is heated to a maximum temperature of 80°C. At the same time, the preheating of the materials housed in the reel takes place. The material is extruded onto the nozzle, which can add a maximum temperature of 350°C. Finally, the material is printed on the printing plate which reaches a maximum temperature of 120°C.

The new control board enables a range of features that are unique to the Mark One industrial line and set a new standard for 3D printers. The entire printing process has been designed with the objective of achieving high performance final components. Before the printing process begins, the chamber is heated to a maximum temperature of 80°C. At the same time, the preheating of the materials housed in the reel takes place. The material is extruded onto the nozzle, which can add a maximum temperature of 350°C. Finally, the material is printed on the printing plate which reaches a maximum temperature of 120°C.

Size:

120x100x170 cm

Printing volume:

300x300x380 mm

Weight:

650 kg

Chamber temperature:

MAX 80°

Double extruder:

MAX 350°

Flat temperature:

MAX 120°

EXPLORE ALL FEATURES

« Continuous production »

« High versatility »

« Quality for prototypes »

Mark One - Rettangolo 2Mark One - Rettangolo 2Mark One - Rettangolo 2

INDUSTRIAL PRODUCTION

The printer is equipped with a double extruder. One is dedicated to the printing of the primary material, while the other is for the support materials.
Mark One - line

The new control board enables a range of features that are exclusive to the Mark One industrial line and set a new standard for 3D printers. The entire printing process has been designed with the goal of producing high-performance end components. Before the printing process begins, the chamber is heated to a maximum temperature of 80°C. At the same time, the materials housed in the web are preheated. The material is extruded onto the nozzle, which can add a maximum temperature of 350°C. Finally, the material is printed on the printing plate which reaches a maximum temperature of 120°C.

Mark One - line

MOST USED FOR

Mark One - APP Automobilismo
Mark One - Automation
Mark One - Mechanical
Mark One - Aerospace
Mark One - Medical
Mark One - line

PRODUCTS PRINTED WITH MK333

Mark One - Applicazioni MK 333 FOTO 1
Mark One - Applicazioni MK 333 FOTO 2
Mark One - Applicazioni MK 333 FOTO 3
Mark One - Applicazioni MK 333 FOTO 4
Mark One - Applicazioni MK 333 FOTO 5

MARK ONE CONTROL BOARD

FEATURES

AUTOMATIC LEVELING OF THE HEATED PLATEN
for precise and reliable prints.
EXTRUDER WEAR
The machines warn the user when it is time to change the nozzle.
COIL WEIGHT
is monitored by the printer to ensure that there is sufficient material to be successfully completed.
AUTOMATIC TEMPERATURE CONTROL
the printer knows the correct temperature parameters for each material and excludes the possibility of errors.
AUTOMATIC FILAMENT CHANGE
the printer can switch independently from one finished filament reel to another full one.
REAL-TIME RENDERING
of the object that is printed and its progress of realization.
EMAIL/SMS NOTIFICATIONS
to one or more operators, regarding notifications of alerts, errors and end-of-press notifications.
PRINT CODE
to improve production time planning.
REAL TIME VIDEO MONITORING
of the object being printed, which can be viewed remotely.
AUTHENTICATION SYSTEM
to enable access only to authorized personnel, either remotely or from the operation panel.
SAVING THE PRINT STATUS
in case of blackout, to resume printing from where it was interrupted.
DETECTION OF THE LOSS OF STEPS
and automatic correction during printing.

MARK ONE CONTROL BOARD

FEATURES

for precise and reliable prints.

The machines warn the user when it is time to change the nozzle.

is monitored by the printer to ensure that there is sufficient material to be successfully completed.

the printer knows the correct temperature parameters for each material and excludes the possibility of errors.

the printer can switch independently from one finished filament reel to another full one.

of the object that is printed and its progress of realization.

to one or more operators, regarding notifications of alerts, errors and end-of-press notifications.

to improve production time planning.

of the object being printed, which can be viewed remotely.

to enable access only to authorized personnel, either remotely or from the operation panel.

in case of blackout, to resume printing from where it was interrupted.

and automatic correction during printing.

Mark One - line

MATERIALS

Mark One - Sfondo materialiMark One - Sfondo materialiMark One - Ready Production icon

MK PRODUCTION

Mark One - Materiali Flessibili Icon

MK FLEXIBLE

SUPPORTED / SUGGESTED

MK Production
MK Flexible
MK Carbon
MK ABS
ASA
HIPS
PET-G
Polypropylene
Conductive
PC
PA
PLA

SUPPORT FILAMENT TYPE

MK Soluble A
MK Soluble L

COIL COMPATIBILITY (size)

Up to 5 Kg

Mark One - line

MATERIALS

Mark One - Sfondo materialiMark One - Sfondo materialiMark One - Materiali Flessibili Icon

MK FLEXIBLE

Mark One - Materiali Tecnici icon

MK CARBON

SUPPORTED / SUGGESTED

MK Production
MK Flexible
MK Carbon
MK ABS
ASA
HIPS
PET-G
Polypropylene
Conductive
PC
PA
PLA

SUPPORT FILAMENT TYPE

MK Soluble A
MK Soluble L

COIL COMPATIBILITY(size)

Up to 5 Kg

REQUEST A QUOTE

CONTACT US

PRINT

TECNOLOGY FDM

NOZZLE
EXTRUDER 2
TYPE Tungsten, hardened steel, brass
MAXIMUM SPEED  200 mm/s
DIAMETER 0.4 – 0.6 – 0.8 mm

TEMPERATURES
EXTRUDER (MAX) 350°C
ROOM 80°C
COIL (PREHEAT) 50°C

EQUIPMENT

NEW ELECTRONICS Yes

AUTOMATIC PLATFORM LEVELING Yes

FLAT SURFACES Glass Ceramic

INTERIOR CHAMBER Powder coated steel

THREAD SENSOR Present

MATERIAL FLOW CONTROL SYSTEM Present

ACCURACY

PRINT PRECISION ±0.200mm / ±0.002mm/mm

SOFTWARE

OS SUPPORTED Windows OS / Mac OS

SLICING SOFTWARE  Dedicated software included

SUPPORT FORMATS  .stl .gcode

CONNECTION Wi-Fi / USB


Follow us on:

  • facebook icon
  • instagram icon
  • linkedin icon



REQUEST A QUOTE

REQUEST A FREE SAMPLE
BECOME A SUPPLIER
WORK WITH US
CONTACTS
PRINTERS
Privacy Policy Cookie Policy
Copyright © 2020 Mark One s.r.l. - P.I. IT 04249560402 - All rights reserved