HT - Mark One
Mark One - Stampanti One Plus FrameMark One - Stampante 3D - HT .jpg

INDUSTRIAL

HT is Mark One's most innovative 3D printer specifically designed for PEEK and ULTEM superpolymers.

HT

Mark One - line

INDUSTRIAL

HT is Mark One's most innovative 3D printer specifically designed for PEEK and ULTEM superpolymers.

Mark One - line

INDUSTRIAL

HT is Mark One's most innovative 3D printer specifically designed for PEEK and ULTEM superpolymers.

Mark-One-Stampanti-One-Plus-focus

INDUSTRIAL

Mark One - Stampante 3D - HTMark One - line

The best Mark One 3D printer: created to stand out in the most demanding sectors and for the production and prototyping of end-components. Thanks to the printing chamber equipped with an automatic temperature control system, and an extruder resistant up to 500°C, it is now possible to print any type of thermoplastic material, including the superpolymers PEEK and ULTEM. The chamber made of AISI 316 (S31600) allows to print certified components for food-grade and medical products. Printing autonomy increases thanks to an automatic filament exchange system that controls a maximum of 4 spools of 5Kg.

Size:

120x100x170 cm


Printing volume:

400x400x400mm


Weight:

700 kg


Chamber temperature:

MAX 220°


Double extruder:

MAX 500°

Display:

15.6''

EXPLORE ALL FEATURES

Mark One - Rettangolo 2

Tackle the most complex markets with the 3D printer for PEEK and ULTEM.

INDUSTRIAL PRODUCTION

The HT represents the best of Mark One’s range of 3D printers. It is designed to print high quality components with the most sophisticated technical materials, such as PEEK and ULTEM.
Mark One - line

The HT chamber is also available in AISI 316 (S31600) stainless steel. This is a necessary requirement for the production of food contact certified products. In addition, with these features, the machine can be used to manufacture parts and components that can be used in the medical field. Up to 4 reels of material can be placed inside the machine. The maximum capacity of each reel is 5 kg, allowing a total of 20 kg of printing material to be stored inside the printer. In addition, the printer is able to automatically switch from one reel to another, increasing the printing autonomy without the need for operator intervention.

Mark One - line

MOST USED FOR

Mark One - APP Automobilismo
Mark One - APP Aerospaziale
Mark One - APP Medicale

MARK ONE CONTROL BOARD

FEATURES

AUTOMATIC LEVELING OF THE HEATED PLATEN
for precise and reliable prints.
EXTRUDER WEAR
The machines warn the user when it is time to change the nozzle.
COIL WEIGHT
is monitored by the printer to ensure that there is sufficient material to be successfully completed.
AUTOMATIC TEMPERATURE CONTROL
the printer knows the correct temperature parameters for each material and excludes the possibility of errors.
AUTOMATIC FILAMENT CHANGE
the printer can switch independently from one finished filament reel to another full one.
REAL-TIME RENDERING
of the object that is printed and its progress of realization.
MAIL/SMS NOTIFICATIONS
to one or more operators, regarding notifications of alerts, errors and end-of-press notifications.
PRINT QUEUE
to improve production time planning.
REAL TIME STREAMING VIDEO
of the object being printed, which can be viewed remotely.
AUTHENTICATION SYSTEM
to enable access only to authorized personnel, either remotely or from the operation panel.
PRINT STATUS SAVING
in case of blackout, to resume printing from where it was interrupted.
STEP-LOSS DETECTION
and automatic correction during printing.

MARK ONE CONTROL BOARD

FEATURES

for precise and reliable prints.

The machines warn the user when it is time to change the nozzle.

is monitored by the printer to ensure that there is sufficient material to be successfully completed.

the printer knows the correct temperature parameters for each material and excludes the possibility of errors.

the printer can switch independently from one finished filament reel to another full one.

of the object that is printed and its progress of realization.

to one or more operators, regarding notifications of alerts, errors and end-of-press notifications.

to improve production time planning.

of the object being printed, which can be viewed remotely.

to enable access only to authorized personnel, either remotely or from the operation panel.

in case of blackout, to resume printing from where it was interrupted.

and automatic correction during printing.

Mark One - line

MATERIALS

Mark One - Sfondo materialiMark One - Sfondo materiali

ULTEM

Mark One - Materiali Flessibili Icon

MK FLEXIBLE

SUPPORTED / SUGGESTED

PEEK
PEEK CF
PAEK
ULTEM1010
ULTEM9085
PPS CF
PA

MK Carbon
MK ABS
ASA
PC
MK Flexible

FILAMENT TYPE SUPPORTED

MK Soluble HT

COIL COMPATIBILITY(size)

Up to 5 Kg

Mark One - line

MATERIALS

Mark One - Sfondo materialiMark One - Sfondo materialiMark One - Materiali Flessibili Icon

MK FLEXIBLE

Mark One - Materiali Tecnici icon

MK CARBON

SUPPORTED / SUGGESTED

PEEK
PEEK CF
PAEK
ULTEM1010
ULTEM9085
PPS CF
PA

MK Carbon
MK ABS
ASA
PC
MK Flexible

FILAMENT TYPE SUPPORTED

MK Soluble HT

COIL COMPATIBILITY(size)

Up to 5 Kg

REQUEST A QUOTE

PRINT

TECNOLOGY FDM


NOZZLE
EXTRUDER 2
TYPE Tungsten, hardened steel, brass
MAXIMUM SPEED  200 mm/s
DIAMETER 0.4 – 0.6 – 0.8 mm


TEMPERATURES
EXTRUDER (MAX) 500°C
ROOM 150°C
COIL (PREHEAT) 100°C

EQUIPMENT

NEW ELECTRONICS Yes


AUTOMATIC PLATFORM LEVELING Yes


FLAT SURFACES Glass Ceramic


INTERIOR CHAMBER Powder coated steel


THREAD SENSOR Present


MATERIAL FLOW CONTROL SYSTEM Present

ACCURACY

PRINT PRECISION ±0.200mm / ±0.002mm/mm

SOFTWARE

OS SUPPORTED Windows OS / Mac OS


SLICING SOFTWARE  Dedicated software included


SUPPORT FORMATS  .stl .gcode


CONNECTION Wi-Fi / USB


Follow us on:

  • facebook icon
  • instagram icon
  • linkedin icon
Privacy Policy Cookie Policy
Copyright © 2020 Mark One s.r.l. - P.I. IT 04249560402 - All rights reserved